My dmx Lighting

Paul says:

Hello Rob,I’m an audio guy to begin with (4 decades, so old school analogue with an interest indigital). However, a muso friend of mine and I decided to acquire a Eurolight LC2412 the other day to run his led par cans (dmx) and other sundries when needed for his gigs (LED battens etc,and a moving light or two).Apart from the company (starts with B) not including a warranty card in the package, I’m having difficulty with addressing what I’ve named number two fixture, both are par 36′s.They are both 6 channel fixtures what I’ve seen, with 10 dipwsitches.On the desk, Ch 1 brings up all leds, ch 2 gives you red, 3 green, 4 blue, 5 chase, and 6 flash or strobe. That works fine on fixture number 1, but bringing up channels 7 or 8 (for fixture number 2) does nothing. Channel 9 on the desk brings up various permutations on fixture 2, from all colours at start to different combinations when you reach 40% on the fader. Between 40% and 60% there is absolutely nothing, nada, zilch, then at 60% you start to get a chase pattern that gets faster as the fader rises to 100%.BIZARRE!I (possibly incorrectly) assumed that addressing the second fixture dipswitches to numbers 1 and 3 (incl 10 to allow dmx) would give me 7 as the start address for the second fixture, but these pars have no brand name on them, so can’t ascertain what is what in that regard. He’s dropping two more par 56 LED cans over later today, so hoping they will perform a bit better.Is it just the fixture that’s causing the problem in terms of dipswitch setting (or me)? Or is it more likely a problem in the brand new desk?

Ellenfsxdx says:

[WATCH]: Tutorial: Guide to Mobile Lighting: Software DMX Features